Stinkeye Challenger build....

[Hpindy]

Hahaha. That’s why I said to be said sitting down. I got mine from Demon Perf for a deal. And... No. you do not need to know.

Thanks for the warning .

Sent from my BBF100-2 using Tapatalk

 

[WhipCat]

Bling bling

Can’t wait to see this thing fired up

 

[Marc W]

How bout some wheel porn! The beadlock vs not aside.... to try to move 4000 lbs 60’ in 1.1X seconds... I’m going to go with the beadlock. Dual beadlocks in fact. The move to the Strange 4-link is requiring new wheels to get the necessary 4” backspace. These just came in today... ☺️

 

[tkracing1]

How bout some wheel porn! The beadlock vs not aside.... to try to move 4000 lbs 60’ in 1.1X seconds... I’m going to go with the beadlock. Dual beadlocks in fact. The move to the Strange 4-link is requiring new wheels to get the necessary 4” backspace. These just came in today... ☺️ View attachment 29476 View attachment 29477 View attachment 29478 View attachment 29479 View attachment 29480

Wow those are beautiful Marc!! Excellent choice!

 

[WhipCat]

Gorgeous wheels

 

[Hpindy]

How bout some wheel porn! The beadlock vs not aside.... to try to move 4000 lbs 60’ in 1.1X seconds... I’m going to go with the beadlock. Dual beadlocks in fact. The move to the Strange 4-link is requiring new wheels to get the necessary 4” backspace. These just came in today... View attachment 29476 View attachment 29477 View attachment 29478 View attachment 29479 View attachment 29480

Shiny !! Me likey ! What is the bolt pattern ?

Sent from my BBF100-2 using Tapatalk

 

[Marc W]

Shiny !! Me likey ! What is the bolt pattern ?

Sent from my BBF100-2 using Tapatalk

5x4.5 with 5/8” studs.

 

[Hpindy]

Good ole old skool mopar bolt pattern!

Sent from my BBF100-2 using Tapatalk

 

[Marc W]

Some more pics just for fun.... Stinky is scheduled to go under the knife in December for the same setup, so I’m sharing this stuff we’ve been doing on Joes car. I wanted to do this since day one with my build but didn’t have any idea of where to start to get it done cost effectively and also know that it would get done right. I got my new rear wheels with the necessary 4” back space to work with the kit so I put them on Joes to check the fit. Perfect! And remember..... all my current rear end goodies are going to be for sale after the first of the year!!!

 

[Marc W]

Billet Specialties 15X10 Comp Series Double Bead Locks with 315/60-15 M/T ET Pros.

 

[Marc W]

Dyno tires!!! Can’t use the slicks on the Dyno so me and Joe split the the cost of a set of these M/T Sportsman’s to use on the rollers. They are the same 30” diameter as the Pros for tuning.

 

[Hpindy]

It sure is purty once completed . I'm curious to see it at the track . You will have to put a go pro under stinky so I can get a groundhogs view of the suspension working when launching the car .

Sent from my BBF100-2 using Tapatalk

 

[Hpindy]

Dyno tires!!! Can’t use the slicks on the Dyno so me and Joe split the the cost of a set of these M/T Sportsman’s to use on the rollers. They are the same 30” diameter as the Pros for tuning. View attachment 30191 View attachment 30192 View attachment 30193

They almost look like 4X4 tires lol they look weird

Sent from my BBF100-2 using Tapatalk

 

[Marc W]

Placing this 4-link requires removing the fuel tank so a 15 gallon replacement goes in the trunk with a external Aeromotive fuel system.

 

[Marc W]

It sure is purty once completed . I'm curious to see it at the track . You will have to put a go pro under stinky so I can get a groundhogs view of the suspension working when launching the car .

Sent from my BBF100-2 using Tapatalk

We’ll have to do that. It’s amazing how spacious it looks under there with the fuel tank and the cradle with all that associated stuff gone. I’m guessing there’s close to a 300 lb weight loss. Once we get the car on the scales again we’ll find out.

 

[Hpindy]

We’ll have to do that. It’s amazing how spacious it looks under there with the fuel tank and the cradle with all that associated stuff gone. I’m guessing there’s close to a 300 lb weight loss. Once we get the car on the scales again we’ll find out.

I noticed that! It does look roomy under there with all that stuff gone . It is curious what the weight saving is if any .

Sent from my BBF100-2 using Tapatalk

 

[jgilj]

Some more pics just for fun.... Stinky is scheduled to go under the knife in December for the same setup, so I’m sharing this stuff we’ve been doing on Joes car. I wanted to do this since day one with my build but didn’t have any idea of where to start to get it done cost effectively and also know that it would get done right. I got my new rear wheels with the necessary 4” back space to work with the kit so I put them on Joes to check the fit. Perfect! And remember..... all my current rear end goodies are going to be for sale after the first of the year!!! View attachment 30177 View attachment 30178 View attachment 30179 View attachment 30180 View attachment 30181 View attachment 30182

Beautiful work being done right there! Congratulations Marc

 

[Marc W]

I noticed that! It does look roomy under there with all that stuff gone . It is curious what the weight saving is if any .

Sent from my BBF100-2 using Tapatalk

Oh there’s a ton of weight difference! Not just in the cradle but also replacing the huge stock fuel tank with that aluminum one that weighs like 5 lbs. Plus you know how we have to run a half tank of fuel to keep the fuel pressure where you need it on a run? Not with this sump fed external system. You could run 3 gallons in there and be plenty. That’s 50 lbs right there!

 

[Marc W]

That fabricated rear end is super light. Light in that you can just pick it up. Another really big example is the axles. Those gun drilled Strange units are 40 spline (huge) and hollow like a gun barrel. They are not only unbreakable but so light you can twirl one like a baton. Pick up one of your DSS pieces and you might hurt your back doing it... 🥵

 

[Hpindy]

That fabricated rear end is super light. Light in that you can just pick it up. Another really big example is the axles. Those gun drilled Strange units are 40 spline (huge) and hollow like a gun barrel. They are not only unbreakable but so light you can twirl one like a baton. Pick up one of your DSS pieces and you might hurt your back doing it... View attachment 30218 View attachment 30219 View attachment 30220 View attachment 30221

Strange has always made top notch stuff . Again I'm patiently waiting for the results of these mods on stinky .

Sent from my BBF100-2 using Tapatalk