"Project Demons Breath"

[Hpindy]

That is a really nice trailer .....

Sent from my BBF100-2 using Tapatalk

 

[Hpindy]

Driveshaft 2.0

Sent from my BBF100-2 using Tapatalk

 

[moparjim]

Driveshaft 2.0

Sent from my BBF100-2 using Tapatalk

At least there isn't a cast adapter.🙃

 

[hellno]

Did you install it, how did it do if so

 

[Hpindy]

At least there isn't a cast adapter.

Thank God.......

Sent from my BBF100-2 using Tapatalk

 

[Hpindy]

Did you install it, how did it do if so

I'm going to do the install tomorrow.

Sent from my BBF100-2 using Tapatalk

 

[Speedy!]

You get your wiring question answered? Car's looking great! How'd you relocate the ps res?

 

[Hpindy]

You get your wiring question answered? Car's looking great! How'd you relocate the ps res?

@Speedy!
Yes I did get the wiring question answered . I had to get a new connector from the dealer .
Thanks . I'm really happy with the out come .
I'm going to do a write up of how I relocated the power steering resiviour. I just want to test it on the road first .

Sent from my BBF100-2 using Tapatalk

 

[Hpindy]

Well folks the drive shaft is in and the exhaust is back on . I'm just waiting on the new windshield washer hose and nozzles and a new connector for the fuel pressure sensor . Then I will start planning my next round of "sneaky"

Sent from my BBF100-2 using Tapatalk

 

[moparjim]

Well folks the drive shaft is in and the exhaust is back on . I'm just waiting on the new windshield washer hose and nozzles and a new connector for the fuel pressure sensor . Then I will start planning my next round of "sneaky"

Sent from my BBF100-2 using Tapatalk

Nice goin, keep it up.
Now if I can only play shuffle the cars game. I might be able to get stuff done myself. But I guess there isn't a big hurry yet. No where to go.🤷‍♂️

 

[Hpindy]

Nice goin, keep it up.
Now if I can only play shuffle the cars game. I might be able to get stuff done myself. But I guess there isn't a big hurry yet. No where to go.

I'm patiently waiting till may so I can at least drive the car and get a road trip or 10.

Sent from my BBF100-2 using Tapatalk

 

[Hpindy]

Did you install it, how did it do if so

@hellno
I must say the installation of the CCI driveshaft is quite easy even on jack stands .

I cut an Allen wrench off and put a deep wall socket on it with a extension on it to tighten everything up .

8mm Allen wrench , 8mm deep wall and 3/8 extension

Sent from my BBF100-2 using Tapatalk

 

[Hpindy]

While I was "rain X" ing my glass on my car today I noticed a surprisingly large amount of bug guts smeared on the INSIDE of the glass!

Sent from my BBF100-2 using Tapatalk

 

[FLYIN4D]

Looking good man! Standing by for reviews on the driveshaft and how much you like or hate it LOL. Car looks bitchin with the new hood!

 

[Hpindy]

Looking good man! Standing by for reviews on the driveshaft and how much you like or hate it LOL. Car looks bitchin with the new hood!

Thanks . I will definitely keep you posted on the driveshaft.

Sent from my BBF100-2 using Tapatalk

 

[Hpindy]

Ok so I broke my connector for the fuel pressure sensor. It took the dealer awhile to locate a repair kit but here it is .
It even has preassembled wire leads in 2 different guages and shrink wrap .

Sent from my BBF100-2 using Tapatalk

 

[Hpindy]

And for those of you wondering how I got around the power steering resiviour here are a couple of pics from my mock up . I used the top return fitting and resiviour from a 6.1 car . I was quite surprised the see when I removed the resiviour from the hellcat pump to find the threaded hole for the retaining bolt just like the 6.1 pump . I did have to dig in to my O-ring kit to find an o-ring that fit properly . I mounted the resiviour right beside the brake resiviour so I can check the fluid easily . I also put a heat shield over the hose as I ran it with the A/C lines .
@Speedy!

 

[Hpindy]

My OCD was working in overdrive . I had to put the windshield washer squirters in . I have a functioning windshield washer system .

Sent from my BBF100-2 using Tapatalk

 

[Frenchcat]

My OCD was working in overdrive . I had to put the windshield washer squirters in . I have a functioning windshield washer system .

Sent from my BBF100-2 using Tapatalk

Nice and clean setup

 

[Speedy!]

So I have a BT cap on my PS pump and it's REAL close to my coil pack cover. I've been looking if I can space it up 2-4mm. Do you happen to have a picture of the res off the car? I'm having a hard time seeing how it bolts up. Nice clean solution you did there. I'd paint the straps purple